Packing specification:
10Kg or 20Kg packing,packed in a plastic drum.

performance feature:
       Two-component,gray semi-fluid, It compounded by various high performance corrosion resistant material and modified toughening heat resistant resin to give rise to the copolymerization,to form the interpenetrating network structure and generate the synergistic effect.In this way, it effectively improves the corrosion resistance of polymers.

product usage:
      It can be preparation of corrosion resistant coatings on the surface of machine parts of suffering from corrosion under 200℃ after using it together with our own composite high temperature resistant curing agent or used as the undercoat and topcoat of BD428 flakes coating adhesives. This product doesn't contain any organic solvent,the curing product has no the micro pores,it can effectively avoid medium immersing through solvent evaporation pores and causing under-film corrosion.

performance index:

The performance parameters
product name	color	physical state	Volume(cm3)	operational time limit(25℃)	can put into using time(25℃)
BD427 desulfurizing slurry recycle pump repair coating	gray	semi-fluid	450 or 1800	25min	24h

Physical and mechanical properties
density (g/cm3)	compressive strength (kg/cm2)GB1041-2008	tensile strength (kg/cm2)GB6329-2009	shear strength (kg/cm2)GB7124-2008	bending strength (kg/cm2)GB1042-1999	hardness（ShoreD） ASTM-D-255	working temperature （℃）
1.11	816	347	232	530	82	-60～200

How to use:
■   Surface treatment: Rust cleaning and coarsening treatment on the pending-repair area,then wash it with cleaning agent,
■   Configuration: According to the mass ratio A:B=4:1,make A,B two component mix uniformly,then use it up within specified operation time limit
■   Coating: Make the mixed-up material be coating on the pending-repair area layer by layer,the first layer should be compacted,make it fully infiltrates with the substrates.For large area protection,can brush coating for 2~3 times according to the actual condition
■   Curing:Cure for 24 hours at temperature of 25～30℃ before putting into use,if the temperature is low,should heat it up or prolong curing time to promote the curing.

Transportation storage:
1.Sealed storage in the cool and dry place,the warranty period is 1 year.
2.Avoid placing it upside down,knocking against and transporting it as a non-dangerous product during transportation.