wear resistant coatings > fast curing wearing compound ceramic bead filling coating

fast curing wearing compound ceramic bead filling coating

BD707K fast curing ceramic fine particle wear abrasion resistant paste epoxy coating

Product description of BD707K fast curing wearing compound small ceramic bead filling
epoxy particle adhesive abrasion resistant coating:
BD707K fast curing wear resistant small ceramic particles coating is the high performance wear&corrosion resistant polymerization ceramic materials compounded by high performance
wear resistant ceramic particles and modified toughening heat resistant resin.It’s widely used in repairing of various wear-out parts and preparation of wear&corrosion resistant coating on the surface of various machine parts which have wear & corrosion
resistant requirements.

Performance features of our BD707K abrasion wear resistant ceramic fine particle
fast curing coatings:
1.With a high bonding strength to metal base material/substrates)
2.don’t flow,good form-ability,with a fast curing speed and a good operation manufacture-ability
3.Suitable for the repairing and protecting of various wear,corrosion working condition.

performance index:

product name	physical state	operation time limit (25℃)	usable time (25℃)	range of application
BD707K fast curing wear resistant ceramic fine particle coating	paste	20min	2h	widely used in repairing of various wear-out parts and preparation of wear resistant protection coating on the surface of various parts which have wear&corrosion resistant requirements. such as:the repairing and preprotecting of Pipe, elbow, mud pump, pumping sand pump, centrifuge, packing boxes, power plant desulfurization system slurry circulating pump body, impeller and so on

color	density (g/cm3)	compressive strength (kg/cm2) GB1041-2008	tensile strength (kg/cm2) GB6329-2008	shear strength (kg/cm2) GB7124-2008	bending strength (kg/cm2) GB1042-1999	(hardness after curing （Shore D） ASTM-D-2556	the highest temperature resistant/ suggest using temperature （℃）
gray	2.4	980	350	105	485	89	160/-60-110

How to use:
1.Surface treatment:Do coarsening treatment on the pending-repair area, grinding with angle grinder or sand blasting and so on, the surface after coarsening treatment should be cleaned,
the surface after this treatment should be the one coarsening,dry and fresh substrates,should be no greasy dirt and dust.

2.Preparation:According to weight ratio or volume ratio 4:1, make A and B two components mix uniformly,and use it up within
20 min.Generally it’s while construction and configuration. Every time the most configuration quantity is not more than 1Kg,
too much adhesive solidified too fast,hasn’t been used up until partial adhesive has solidified and can’t be used.
According to the actual temperature,configuration can be appropriately a little more in winter,proper less in summer.
If the temperature is too low,you can properly heat up the A component to reduce viscosity for easy to configure.

3.Coating:The suitable coating thickness of BD707K is 3-8mm,the most thickness can be 30mm.Make the mixed-up material
spread coating on the pending-repair area layer by layer, the first layer should be compacted,make it infiltrate fully with the substrates.Repair the surface to be
smooth after the coating spreading in the suitable size.If the surface has high requirements,you can use BD426 corrosion
resistant repairing agent to coat on the surface as the topcoat, this material can’t do machining,so you should pay attention
to controlling the coating thickness to avoid appearing interference phenomenon in the assembly.

Curing: Cure for 2 hours at the temperature of 25 degree before using,(If you can heat it up to the temperature of 60-80 degree and keep this temperature for 2 hours, in this way,can improve 30% comprehensive performance) If the temperature
is below 10 degree,should heat it up or prolong curing time to promote the curing. General construction in winter,you can use
iodine tungsten lamp to do irradiation heating with 40cm distance from the coating.

Packaging specification:
1.Two-component,10Kg/group; packed in a plastic drum. A component: 8Kg/drum, B component: 2Kg/drum.
2.We could offer professional customized packaging and subpackage services based on users' requirements.

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 12 months.Avoid placing it upside down,knocking against
and transporting it as a non-dangerous product during transportation.

Special version:
1.This parameter is for laboratory conditions,due to the actual working condition is more complex,suggest the users to do the
pretest according to actual working condition

2.When the environment temperature is below 15 degree,the curing time will prolong,should take proper heating measure

3.When the environment temperature is more than 25 degree or the mixing quantity is too large,the curing speed will expedite,
should properly shorten the application time of coating after mixing.

Construction protective measures:
1.Wear the protective masks,wear the protective glasses and rubber gloves
2.Need washing hands with soap before eating,drinking or smoking.
3.The health hazard after touching: a few people will have skin allergy phenomenon,see a doctor in time and avoid touching with
this product again.should wipe it with ethyl acetate when the sizing material paste on the skin by careless,then wash it with clear
water.Should wash it with clear water immediately and see a doctor when splashing into the eyes by careless.

Warm Prompt:
Residual adhesive solution cured products are non-toxic harmless organic solid,but maybe it will produce poisonous gas when
burning,non-professional personnel can not do combustion disposal,should be sent to garbage power plant or garbage burning
place treatment.

Fire prevention measures:
Should choose dry powder to extinguish fire,can cover and flap it with dry powder,grit(the construction using abrasive) or
the non chemical fiber fabric when the sizing material catching fire.

Product packaging actual photo of BD707 fast curing small ceramic bead filling particle adhesive
abrasion resistant coating wearing compound:

------分隔线----------------------------