wear resistant coatings > pourable wearing abrasion resistant compound epoxy coating

pourable wearing abrasion resistant compound epoxy coating

BD701 pourable anti wear abrasion resistant epoxy resin ceramic coating

Product description of BD701 pourable wearing abrasion resistant epoxy compound
repair coating:
BD701 pourable anti abrasion wear resistant coating is the high performance wear resistant,corrosion resistant material
which compounded by the highperformance abrasion resistant materials like silicon carbide,first class corundum etc.
And modified toughening resin.Used in the pouring fashioned abrasion resistant workpiece.

Performance features of our BD701 anti abrasion wear resistant pourable ceramic particle epoxy coatings:
1.Excellent in wear resistance and corrosion resistance
2.The pouring technology is simple,easy for operation.

Product index:

Product item	Physical state	Operation time limit (80℃)	Usable time (25℃)	Range of application
BD701 pourable anti abrasion wear resistant coating	Semi-fluid	15min	24 hours	Used in the pouring fashioned abrasion resistant workpiece.

color	density (g/cm3)	Compressive strength (kg/cm2) GB1041-2008	Tensile strength (kg/cm2) GB6329-1999	Shear strength (kg/cm2) GB7124-2009	Bending strength (kg/cm2) GB1042-2008	Working temperature （℃）
black	2.6	1428	435	131	834	-60～120

How to use:
1.Surface treatment: Do coarsening treatment on the pending-repair part,grinding with angle grinder or sand blasting etc,the surface after coarsening treatment should be cleaned,
the surface after this treatment should be the one coarsening,dry and fresh substrates,should be no greasy dirt and dust.

2.Configuration:Heat the A component up to the temperature of about 80 degree,then pour the B component into it
according to the weight ratio 100:5 and mix them uniformly,and use it up within 15 min.Generally while it’s construction
and configuration,every time the largest configuration quantity is not more than 10 kilograms,in order to avoiding partial
adhesive freezing and can’t be used before it hasn’t been used up.

3.Pouring: Make the mixed-uniform BD701 abrasion resistant material pour into the cavity of fashioned molding or
the gap of the workpiece.

4.Curing:it can be put into using after curing for 24 hours at the temperature of 25 degree,or it can be put into using after
curing for 4 hours at the temperature of 80 degree.

Transportation storage:
Sealed storage in the cool and dry place. The warranty period is 12 months. Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Packaging specification:
Two-component,25Kg/group,packed in a iron drum.A component: 23.8Kg/drum, B component: 1.2Kg/kettle.
We could offer you professional customized packaging and subpackage services based on users' requirements.

Special version:
1.This parameter is for laboratory conditions,due to the actual working condition is more complex,suggest the users to do
the pretest according to actual working condition
2.When the environment temperature is below 15℃,the curing time will prolong,should take proper heating measure.
3.When the environment temperature is more than 25℃ or the mixing quantity is too large,the curing speed will expedite,
should properly shorten the application time of coating after mixing.

Construction protective measures:
1.Wear the protective masks,wear the protective glasses and rubber gloves
2.Need washing hands with soap before eating,drinking or smoking.
3.The health hazard after touching: a few people will have skin allergy phenomenon,see a doctor in time and avoid touching with
this product again.should wipe it with ethyl acetate when the sizing material paste on the skin by careless,then wash it with clear
water.Should wash it with clear water immediately and see a doctor when splashing into the eyes by careless.

Warm Prompt:
Residual adhesive solution cured products are non-toxic harmless organic solid,but maybe it will produce poisonous gas
when burning,non-professional personnel can not do combustion disposal,should be sent to garbage power plant or
garbage burning place treatment.

Fire prevention measures:
Should choose dry powder to extinguish fire,can cover and flap it with dry powder,grit(the construction using abrasive)
or the non chemical fiber fabric when the sizing material catching fire.

Product construction application photos:

------分隔线----------------------------